UKCA certification:
UKCA mark is a new British product mark, which will be used for products sold in the UK (England, Wales and Scotland) market. It covers most of the goods that previously required CE marking. The UKCA mark does not apply to goods sold on the Northern Irish market.
When to use the UKCA logo:
After January 1, 2021, products that meet all the following conditions need to use the new UKCA mark immediately.
1, products manufactured for the British market;
2. The law requires the use of the UKCA mark; 3. Products that require a mandatory third-party conformity assessment;
4. The product has been subject to conformity assessment by the British conformity assessment agency, and before January 1, 2021, the conformity assessment documents have not been transferred from the British institution to the EU recognized institution (if the transfer is successful, it will be regarded as equivalent to the CE certification and can be used The CE mark continues to be sold in the UK market, without the need to use the UKCA mark).
How to use the UKCA logo:
(1) How to place the UKCA logo:
In most cases, the UKCA logo must be used on the product itself or on the packaging. In some cases, it may be placed on manuals or other supporting documents. This will vary according to the specific regulations that apply to the product.
General applicable rules:
1. The UKCA logo can only be placed on the product by the manufacturer or authorized representative (where permitted by relevant laws);
2. When the UKCA mark is affixed, the manufacturer or authorized representative shall be fully responsible for the product's compliance with the requirements of relevant laws;
3. Only the UKCA logo can be used to show that the product complies with relevant British laws;
4. The manufacturer or authorized representative must not place any mark or logo on the product that may misunderstand the meaning or form of the UKCA mark to a third party;
5. Other marks that affect the visibility, legibility or meaning of the UKCA mark shall not be attached to the product;
6. Unless required by law, the UKCA logo cannot be used on products.
(2) Rules for using UKCA images:
It must be ensured that when reducing or expanding the logo, the UKCA logo composed of letters must be in the same proportions as the version listed below. The height of the UKCA mark is at least 5mm, unless relevant laws provide for a different minimum size. The UKCA logo must be clearly visible (it must be attached to the product from January 1, 2023).
UKCA mark is a new British product mark, which will be used for products sold in the UK (England, Wales and Scotland) market. It covers most of the goods that previously required CE marking. The UKCA mark does not apply to goods sold on the Northern Irish market.
When to use the UKCA logo:
After January 1, 2021, products that meet all the following conditions need to use the new UKCA mark immediately.
1, products manufactured for the British market;
2. The law requires the use of the UKCA mark; 3. Products that require a mandatory third-party conformity assessment;
4. The product has been subject to conformity assessment by the British conformity assessment agency, and before January 1, 2021, the conformity assessment documents have not been transferred from the British institution to the EU recognized institution (if the transfer is successful, it will be regarded as equivalent to the CE certification and can be used The CE mark continues to be sold in the UK market, without the need to use the UKCA mark).
How to use the UKCA logo:
(1) How to place the UKCA logo:
In most cases, the UKCA logo must be used on the product itself or on the packaging. In some cases, it may be placed on manuals or other supporting documents. This will vary according to the specific regulations that apply to the product.
General applicable rules:
1. The UKCA logo can only be placed on the product by the manufacturer or authorized representative (where permitted by relevant laws);
2. When the UKCA mark is affixed, the manufacturer or authorized representative shall be fully responsible for the product's compliance with the requirements of relevant laws;
3. Only the UKCA logo can be used to show that the product complies with relevant British laws;
4. The manufacturer or authorized representative must not place any mark or logo on the product that may misunderstand the meaning or form of the UKCA mark to a third party;
5. Other marks that affect the visibility, legibility or meaning of the UKCA mark shall not be attached to the product;
6. Unless required by law, the UKCA logo cannot be used on products.
(2) Rules for using UKCA images:
It must be ensured that when reducing or expanding the logo, the UKCA logo composed of letters must be in the same proportions as the version listed below. The height of the UKCA mark is at least 5mm, unless relevant laws provide for a different minimum size. The UKCA logo must be clearly visible (it must be attached to the product from January 1, 2023).